Being an Engineer

Being an Engineer

Aaron Moncur
Country USA
Language EN-US
Episodes 364
Latest 20.11.2026

The Being An Engineer podcast collects and shares industry knowledge and best practices associated with the discipline of engineering. It aims to help engineers worldwide connect with relevant companies, technologies, people, resources, and opportunities. The podcast is hosted by Aaron Moncur and features interviews and discussions on engineering topics.

Episodes

  • Lucas Pianegonda | How to Choose Sustainable Materials for Medical Devices
    Lucas Pianegonda | How to Choose Sustainable Materials for Medical Devices 20.11.2026 41m
    Send us Fan Mail Lucas R. Pianegonda is the founder of Gradical, a Switzerland-based consultancy focused on helping medical technology companies make better and more sustainable decisions about plastics. Over the course of his career, Lucas has developed expertise spanning polymer science, material testing, product development, regulatory compliance, manufacturing, and sustainability, and he has now supported more than 40 MedTech companies in improving how they use plastics. Lucas earne...
  • Ryan Pickens | AI Tools You Can Use Today for Hardware Development
    Ryan Pickens | AI Tools You Can Use Today for Hardware Development 13.11.2026 53m
    Send us Fan Mail What if AI could help you take a hardware product from concept to production in a fraction of the time? In this episode of Being an Engineer, Aaron Moncur sits down with Ryan Pickens, founder of Pickens Cycles and former Director of Engineering at TE Connectivity, to explore how AI is transforming the way engineers design, develop, and launch physical products. Ryan shares his journey from corporate engineering leadership to entrepreneurship, where he's using AI-powere...
  • Mark Blakey & Ruben Inzunza | Behind The Scenes: How Pipeline Developed EZ Motion
    Mark Blakey & Ruben Inzunza | Behind The Scenes: How Pipeline Developed EZ Motion 06.11.2026 52m
    Send us Fan Mail What if mechanical engineers could automate motors, pneumatic actuators, and testing equipment without needing to write complex code or rely on a dedicated controls engineer? In this episode of Being An Engineer, host Aaron Moncur welcomes two members of the Pipeline Design & Engineering team: Ruben Inzunza, Director of Automation, and Mark Blakey, Senior Mechanical Engineer. Together, they take listeners behind the scenes of Easy Motion, an automation platform develope...
  • Ghulam Murtaza | Overcoming Adversity: An Inspiring Tale of Perseverance
    Ghulam Murtaza | Overcoming Adversity: An Inspiring Tale of Perseverance 30.10.2026 41m
    Send us Fan Mail Ghulam Murtaza is a Controls Project Engineer at Vanderlande with a background spanning industrial automation, robotics, controls, data science, cloud computing, and artificial intelligence. Before joining Vanderlande, he worked as a Senior Automation Engineer with CBRE supporting Amazon fulfillment operations, where he developed tools aimed at improving equipment reliability, troubleshooting, and maintenance efficiency. His journey into automation was far from straight...
  • Eron Flory | Toastmasters for Engineers, and FIRST Robotics
    Eron Flory | Toastmasters for Engineers, and FIRST Robotics 23.10.2026 53m
    Send us Fan Mail Eron Flory has built a career around turning difficult engineering problems into real products—and, increasingly, around helping other engineers learn how to do the same. His background crosses custom automation, robotics, manufacturing equipment, medical-device R&D, process development, and engineering leadership. Before recently stepping away from full-time engineering, he spent more than six years at Medtronic working on steerable delivery systems for transcatheter mitral ...
  • James Bryant | A Process For Engineers to Succeed at Home & at Work
    James Bryant | A Process For Engineers to Succeed at Home & at Work 16.10.2026 43m
    Send us Fan Mail Dr. James Bryant, Ph.D., P.E., is a dynamic force in the engineering and leadership development arenas. With a robust background in civil engineering, James has spent over 20 years leading multimillion-dollar projects in the transportation sector, contributing to technical publications, and serving on national committees. His tenure at the Transportation Research Board of the National Academies saw him providing executive oversight for over 22 volunteer technical committees, ...
  • Elad Einav | How To Engineer Covered Medical Device Stents
    Elad Einav | How To Engineer Covered Medical Device Stents 09.10.2026 44m
    Send us Fan Mail Elad Einav is a mechanical engineer, entrepreneur, and Co-Founder and CEO of Medibrane, a medical-device contract development and manufacturing organization specializing in polymer covers, membranes, coatings, and components for stents and other implantable devices. His work sits at the intersection of mechanical design, polymer science, manufacturing-process development, quality, and medical-device commercialization. Elad began his career as a mechanical engineer befor...
  • PDX 2026 Starts Soon—Get Your Ticket Now
    PDX 2026 Starts Soon—Get Your Ticket Now 08.10.2026 1m
    Send us Fan Mail PDX 2026 starts October 20 in Phoenix, AZ. Practical training for growth-minded engineers. Learn more and register at https://pdexpo.engineer/ Subscribe to the show to get notified so you don't miss new episodes every Friday. The Being An Engineer podcast is brought to you by Pipeline Design & Engineering. Pipeline partners with medical & other device engineering teams who need turnkey equipment like cycle test machines, custom test fixtures, automation equipment, assem...
  • Matt Ketterer | The Brazilian Jiu Jitsu Episode
    Matt Ketterer | The Brazilian Jiu Jitsu Episode 02.10.2026 57m
    Send us Fan Mail This episode of Being An Engineer takes a detour from engineering and onto the mats as Aaron sits down with Pipeline Design & Engineering Principal Controls Engineer and longtime Brazilian Jiu-Jitsu practitioner Matt Ketterer. With more than 20 years of BJJ experience and a second-degree black belt, Matt shares what initially drew him to the sport, the humbling experience of being a beginner, and how his approach to training has evolved over the years. Aaron and Matt di...
  • Dakota Welker | User Needs, Design Inputs, Verification & Validation
    Dakota Welker | User Needs, Design Inputs, Verification & Validation 25.09.2026 42m
    Send us Fan Mail Dakota Welker is a mechanical engineer, product developer, and founder of Think MedTek, an engineering consultancy focused on helping startups transform early-stage ideas into functional, manufacturable products. A Purdue University graduate with a background in engineering technology and organizational leadership, Dakota has worked across medical devices, industrial automation, pneumatic systems, and other forms of physical product development. Through Think MedTek, D...
  • Elif Miskioglu | The Science of How to Build Engineering Intuition
    Elif Miskioglu | The Science of How to Build Engineering Intuition 18.09.2026 53m
    Send us Fan Mail Elif Miskioğlu is an Associate Professor of Chemical Engineering at Bucknell University and a scholar of engineering education. She holds a B.S. in Chemical and Biological Engineering with a genetics minor from Iowa State University, along with an M.S. and Ph.D. in Chemical Engineering from The Ohio State University. At Bucknell, she has taught courses including separations, senior design, technical and professional communication, mass and energy balances, and thermodynamics....
  • Antonio Valadez & Nate Post | Building Better Engineers Through Better Leadership
    Antonio Valadez & Nate Post | Building Better Engineers Through Better Leadership 11.09.2026 1h 6m
    Send us Fan Mail Nate Post and Antonio “Tony” Valadez bring decades of combined experience leading engineering, manufacturing, continuous improvement, and new product introduction efforts within the medical-device industry. Nate currently serves as Director of New Product Introduction at Edwards Lifesciences, where his career has progressed through manufacturing leadership and NPI roles. Outside of medical devices, he is the founder of Blue Collar Blades, where he handcrafts knives and other ...
  • Jacob Evink | From CAD to Mechanical Curiosity: Student Engineer Spotlight
    Jacob Evink | From CAD to Mechanical Curiosity: Student Engineer Spotlight 04.09.2026 36m
    Send us Fan Mail Jacob Evink is a mechanical engineering student at Western Michigan University with interests in mechanical design, robotics, manufacturing, and product development. Rather than waiting until graduation to begin practicing engineering, Jacob is actively developing projects that allow him to apply CAD, prototyping, electronics, and mechanical problem-solving to real-world challenges. His industry experience has already exposed him to several sides of the product-developm...
  • Robert States | How Engineers Can Thrive in Corporate R&D
    Robert States | How Engineers Can Thrive in Corporate R&D 28.08.2026 46m
    Send us Fan Mail Robert States is Vice President of Technical Services at Cormica Medical Device & Pharmaceutical Testing, where he supports clients across medical device, pharmaceutical, and combination product testing. His work spans development strategy, risk management, testing strategy, process development, supply chain optimization, and regulatory-minded technical problem solving. Cormica’s announcement of his appointment highlighted his role in strengthening global technical services a...
  • Michael Brooks | How BayCath Medical Is Rethinking Catheter Development
    Michael Brooks | How BayCath Medical Is Rethinking Catheter Development 21.08.2026 47m
    Send us Fan Mail Michael Brooks is the founder and CEO of BayCath Medical, a Silicon Valley medical-device company specializing in the design, development, and contract manufacturing of catheter-based products. BayCath was created to give startups and fast-moving R&D teams a more collaborative manufacturing partner—one capable of supporting rapid prototyping, iterative development, pilot production, and smoother transfers into manufacturing. Michael launched BayCath after seeing cathete...
  • Tony Kelbert | Authenticity, Engineering, and the Business of Manufacturing
    Tony Kelbert | Authenticity, Engineering, and the Business of Manufacturing 14.08.2026 1h 11m
    Send us Fan Mail Tony Kelbert is a mechanical engineer, manufacturing strategist, and Chief Burrito Officer at AeroGrowth, an organization focused on helping precision manufacturers pursue and win the right aerospace and defense work. Drawing on experience from both the OEM and supplier sides of the industry, Tony helps manufacturers better understand positioning, quoting, customer relationships, and the realities of selling into complex aerospace supply chains. Tony began his engineeri...
  • S7E33 Sam Thomason | The Black Magic of Nano-Machining
    S7E33 Sam Thomason | The Black Magic of Nano-Machining 07.08.2026 59m
    Send us Fan Mail Sam Thomason’s career sits at the intersection of technical sales, manufacturing automation, Japanese business culture, and advanced machining. With more than 14 years of experience in CNC machinery, factory automation, and industrial robotics, Sam has worked across the U.S., Japan, and Australia helping manufacturers evaluate and adopt technologies that improve productivity, safety, and competitiveness. He is currently National Sales Manager for Shibaura Machine Compan...
  • S7E32 Steven Szymeczek | From Taking Things Apart to Teaching Engineers How to Build
    S7E32 Steven Szymeczek | From Taking Things Apart to Teaching Engineers How to Build 31.07.2026 46m
    Send us Fan Mail Steven Szymeczek joins the podcast to share a career shaped by curiosity, hands-on learning, and a willingness to explore new opportunities. He traces his path from taking apart gadgets as a child to manufacturing crop-duster components early in his career, designing aircraft interiors, and eventually launching his own product development business. Steven and Aaron discuss the realities of moving from engineering into entrepreneurship, including learning how to communic...
  • S7E31 Stanley Leong | Engineering Your Finances: A Former Electrical Engineer’s Guide to Building Wealth
    S7E31 Stanley Leong | Engineering Your Finances: A Former Electrical Engineer’s Guide to Building Wealth 24.07.2026 50m
    Send us Fan Mail Stanley C. Leong brings an unusual and highly relevant perspective to the world of engineering career development: he started as an engineer, then built a second career helping engineers manage the wealth and financial complexity that can come with technical success. He earned both his Bachelor’s and Master’s degrees in Electrical Engineering from Cornell University before working in chip design roles at IBM and Agilent Technologies. That early engineering background s...
  • S7E30 Steve Riley | Small Improvements, Big ROI: Lessons from the Factory Floor
    S7E30 Steve Riley | Small Improvements, Big ROI: Lessons from the Factory Floor 17.07.2026 37m
    Send us Fan Mail Steve Riley brings a unique perspective to Being An Engineer because he is not an engineer by title, but he has spent his career working directly in the environments where engineering, operations, manufacturing, and continuous improvement have to come together. His background spans plant leadership, program management, operations management, engineering management, injection molding, medical products, carbon fiber manufacturing, dental equipment, and Lean/5S implementation.&n...

Popular in

The podcast also appears in the podcast charts of these countries.