Manufacturing Hub
Vlad Romanov & Dave Griffith
0
Manufacturing Hub brings you manufacturing news, insights, opportunities, and cutting edge technologies. The podcast aims to inform, educate, and inspire leaders and workers in manufacturing, automation, and related fields.
Episodes
-
Ep. 277 - Inside the Siemens Pop Up Factory: How a Modular CPG Plant Runs Half Real and Half Virtual 15.10.2026 1h 10mThe Siemens pop up factory is a modular CPG plant where virtual PLCs, real controllers, and a live digital twin run small batches side by side.Most factories are built for long runs of the same product. Davide Picciotto explains why that model is being stretched. COVID supply chain shocks pushed brands to add flexible areas inside existing plants, and events like the World Cup raised a sharper question: what if a factory could be stood up close to demand, run personalized products for a season, and then move? Siemens is validating the idea with PepsiCo through what Davide calls a hybrid immers... -
Ep. 274 - David Schultz on ISA 95, Knowledge Graphs, and Building a Data Model for AI 17.09.2026 1h 6mThere is no pyramid anywhere in the ISA 95 standard. David Schultz explains what is actually inside it and how to turn it into a working data model.Most engineers meet ISA 95 as a layered triangle on LinkedIn and never get past it. David Schultz of Amárach StackWorks takes that image apart. The pyramid appears nowhere in the standard, which exists to define how business systems such as ERP exchange information with manufacturing and control systems. Eight parts are published today, Part 1 refreshed in 2025, with Part 9 still in committee. Start with Parts 1 and 2. Part 1 sets the scope, Part 2... -
Ep. 273 - How to Build a Systems Integration Company: Positioning, Money and Procurement 10.09.2026 1h 22mMost conversations about starting a systems integrator skip the parts that sink people. Dave and Vlad spend this one on insurance, licenses and procurement.After a month of founder interviews, Dave and Vlad close the series with their own experience. Vlad started at plant level with Procter and Gamble and Kraft Heinz, deciding how outside integrators would execute, before crossing over to work for an integrator across food and beverage and CPG packaging. Dave came from aviation and aerospace through a German machine builder and a distributor, then ran a small integration company doing MES, OEE... -
Ep. 272 - Systems Integration Careers: OEM, Distributor, Machine Builder and Business Owner 03.09.2026 1h 28mMost people ask how to start a systems integrator. Rich Kuechenmeister has effectively built one five times, and the lesson is that the parent business decides what you become.Rich is owner and partner at Fishbone Technical Services. Before that he built automation groups inside a semiconductor equipment OEM, an automation components manufacturer, a products distributor, and a custom machine builder where he stood up a UL 508A panel shop from nothing. Each of those businesses sold something different, and that changed the engineering. At a machine builder the machine is the dog and the control... -
Ep. 271 - Growing an Oil and Gas Plus Mining Systems Integrator in Alberta with JPI Solutions 27.08.2026 1h 11mOil and gas automation runs on royalty accounting as much as process control. Dustin Symes explains how that shapes every SCADA decision JPI Solutions makes.Canadian oil and gas is structured differently than most assume. In the US mineral rights usually sit with individuals, so custody transfer draws a hard line between upstream and midstream. In Canada the provinces hold most rights, so a producer can gather 100 wells into one plant and sell to a pipeline company there. That lands on the automation: much of the SCADA data collection exists to answer who is paying whom and how much royalty is... -
Ep. 270 - How to Start a Systems Integrator: Scope, Hiring, and the Bottleneck That Is You 20.08.2026 1h 15mMost people who start a systems integrator expect to keep doing the engineering. Dylan DuFresne explains why that stops being true inside two years.Ask ten people what a systems integrator is and you get ten answers, so Dylan DuFresne starts from first principles: a third party that connects systems which used to sit isolated. The market then splits in two. One is the generalist who has seen a hundred platforms across a thousand facilities and knows how they behave together. The other is the specialist who lives inside one or two stacks. If you know what you are building, hire the specialist.... -
Ep. 269 - Siemens Xcelerator Marketplace: Digital Transformation SMB Manufacturers Can Afford 12.08.2026 1h 13mSiemens says a small manufacturer can start production optimization for $2,000 a year. Martin Valkysers and Flemming Kongsberg explain what that buys you.Most digital transformation advice assumes a budget and an engineering bench most plants do not have. Flemming Kongsberg, who runs the SMB focus inside the Siemens CTO organization, discards the usual revenue and headcount definitions: an SMB is any manufacturer without the skills to absorb a complex digital change, and that includes some very large companies. He describes one customer running 900 devices across 17 locations where 90 percent... -
Ep. 268 - David Nichols of Loupe on Claude Code, AI Retrofits, and the End of the SI Moat 06.08.2026 1h 8mDavid Nichols of Loupe explains what actually changed in automation engineering this year, and why control retrofits just got far cheaper.Nearly twenty years into building high performance controls, David Nichols is blunt about what AI did to his business: what used to take six weeks now takes two, and his team ships roughly five times more software per sprint. An engineer dropped the raw documentation from a failing robotic cell into a folder, asked Claude for a state diagram, and got a reverse engineered flow chart in thirty minutes that beat anything the customer had. The error recovery gap... -
Ep. 267 - Ujjwal Kumar of Siemens on Deglobalization, Reshoring, and Adaptive Manufacturing 30.07.2026 1h 2mDeglobalization is rewriting where factories get built, and Ujjwal Kumar of Siemens explains what has to change on the plant floor before reshoring actually works.For thirty years the manufacturing playbook was labor arbitrage. Move high volume, low mix production to wherever disciplined labor was cheapest, then ship it back. Ujjwal Kumar, President of Automation for Siemens Digital Industries in the Americas, argues that model has quietly stopped making sense. Demand has fragmented into high mix, lower volume, regionally specific production, and the factories in Suzhou running on robots and a... -
Ep. 266 - Automate 2026 Reality Check: AI, Virtual PLCs, Ignition, and Plant Modernization 18.07.2026 1h 27mAfter several weeks away from the podcast, Dave Griffith and Vladimir Romanov return to Manufacturing Hub to unpack their experiences at Automate 2026 and discuss what the event revealed about the current state of industrial automation.Automate showcased an enormous range of robotics, industrial AI, machine vision, software, cloud connectivity, and emerging automation technology. However, some of the most revealing conversations were not about futuristic factories. They were about PLC 5 migrations, aging SLC systems, obsolete PanelView terminals, industrial networks, basic data collection, and... -
Ep. 265 - Automate 2026 Survival Guide: Booths, Networking, and a Production Line Demo #scada #mes 18.06.2026 35mAutomate 2026 lands in Chicago next week, and Dave and Vlad break down how to work the show floor, where to network, and what to expect from their live booth demos.Automate is the largest automation trade show in North America, and a four day event rewards preparation. Dave and Vlad share tactics refined over five years of attending together. The floor opens at 10:00 AM on Monday, and registration lines have swung from a five minute wait to nearly two hours, so arriving early matters. Monday morning and Thursday are the quietest days to reach specific vendors, while Tuesday and Wednesday draw... -
Ep. 264 - Why AI Loves Automation: Siemens on Digital Twins, Guardrails, and Orchestration 11.06.2026 1h 4mAI can finally write back to the plant floor, but only if you can trust it. Chris Stevens and Annemarie Breu of Siemens explain how orchestration makes that safe.Industrial AI has reached a turning point. Manufacturers can already collect data, contextualize it, and surface insights, but the hardest step has always been turning insight into action on real control equipment. Chris Stevens and Annemarie Breu of Siemens explain how an orchestration layer finally closes that loop. Annemarie frames the tension clearly. Automation depends on determinism, while large language models are probabilistic... -
Ep. 263 - Why Industrial Protocols Win on Business Not Technical Merit, with Horner Automation 04.06.2026 1h 3mIndustrial network protocols decide whether a machine talks or stays silent. Chuck from Horner Automation breaks down how they win, fade, and converge.Chuck has spent 36 years at Horner Automation and lived through what the industry once called the fieldbus wars. Before Horner became known for its all in one controllers, it spent a decade building specialty IO modules for GE Fanuc during the era of DeviceNet, SDS, InterBus S, PROFIBUS, and CANopen. His core argument is that most of those early protocols were technically fine. The ones that became standards won on the commercial weight of the c... -
Ep. 262 - The Human Side of Manufacturing Change: Incentives, Pain Points, and Operator Buy In 28.05.2026 1h 5mChange management is the reason most manufacturing improvement projects quietly stall, even when the technical work is sound and the tools are right.Vlad Romanov and Dave Griffith unpack their own change management war stories from across two decades in industrial automation. Vlad frames change management as understanding risk to the business and to every stakeholder, then putting the process in place that lets the organization absorb that risk. Technical feasibility is the easy half of any project. Getting humans to consistently work the new way is the half that wins or loses the budget.Vlad... -
Ep. 261 - Change Management in Manufacturing: Operators, Tribal Knowledge, and the Industrial Elder 21.05.2026 1h 2mChange management in manufacturing breaks down at the people layer, not the technology layer. This episode explains how engineering leaders actually drive adoption.Ronald Sherrod is a Staff Automation Engineer at Regeneron deploying a global event based architecture and Unified Namespace rollout across pharmaceutical operations. Ron, Vlad Romanov, and Dave Griffith dig into the parts of change management that rarely make it onto vendor decks. Subscribe to Manufacturing Hub for weekly conversations with industrial automation practitioners.Want to go deeper? Vlad and the team at Joltek have cove... -
Ep. 260 - Why Ignition Is Winning: Colby Clegg and Carl Gould on SCADA, Open Access, & Industrial AI 14.05.2026 1h 10mInductive Automation cofounders Colby Clegg and Carl Gould go deep on the origins of Ignition, the road to 8.3, and what AI means for industrial automation.Vlad and Dave host Colby Clegg, CEO, and Carl Gould, CTO, of Inductive Automation together for the first time to trace the full arc of the company. The story begins in 2003, when Sacramento systems integrator Steve Heckman brought Colby and Carl in to build the missing glue layer between OT data and modern IT tooling. What began as logging values into SQL databases became Factory PMI and eventually Ignition.A key thread is why Ignition brok... -
Ep. 259 - Logan Terry of LSI on Change Management: The Soft Side of SCADA, MES, & ERP Projects 07.05.2026 1h 8mChange management decides whether your MES or digital transformation project lasts, or quietly gets shut off six months after go live.Vlad Romanov and Dave Griffith sit down with Logan Terry, who leads digital transformation at LSI, to dig into change management as the deciding factor in any automation or MES rollout. Logan defines change management as a methodical approach to moving an individual, team, or organization from a current state to a desired future state. The closer a system sits to where decisions are actually made, the more change management it requires, which is why MES is the s... -
Ep. 258 - Hannover Messe Recap, the State of Industrial AI, and What Comes Next at Automate 2026 30.04.2026 1h 8mIndustrial AI is moving past the chatbot phase. From the Hannover Messe show floor to system integration workflows, here's what end users actually want now.Vlad just returned from his first Hannover Messe, the largest industrial automation and manufacturing trade show in Europe. The takeaway that defined the week was a shift in how end users open conversations. A year ago, every booth visit started with the question, do you have AI? This year every vendor has some flavor of AI, so the question has flipped back to the one that actually matters. How does your product solve a specific problem in... -
Ep. 256 - Why Machine Learning Still Outperforms LLMs for Manufacturing Process Control 09.04.2026 1h 9mDigital twins and machine learning are redefining batch optimization in manufacturing. Learn how centerlining models can catch quality issues in real time before they become irreversible.Concepts like digital twins, golden batch profiles, and statistical process control have long promised more than they delivered. Virag Vora of Twin Thread argues that layering machine learning on top of these ideas is what finally brings them to life. In this context, a digital twin is entirely data centric: a real time and historical representation of a process that serves as the foundation for AI models.The... -
Ep. 255 - From Virtual Design to Physical AI: Vention's Blueprint for Industrial Robotics 02.04.2026 1h 4mPhysical AI is arriving on factory floors ahead of schedule, and Vention is already deploying it on applications four automation integrators failed to crack.François Giguère, CTO of Vention, draws a precise line between agentic AI and physical AI. Agentic systems process data and return data. Physical AI controls motion and actuation that produce real world consequences on a factory floor where a hundred percent uptime is the only acceptable standard. Giguère has spent a decade helping build Vention, a platform that lets manufacturers design robotic cells in 3D, program them through natural la...
Popular in
The podcast also appears in the podcast charts of these countries.