Maintenance Break

Maintenance Break

Maintenance Break Podcast
Country USA
Language EN
Episodes 24
Latest 09.11.2026

Bite-sized lessons on asset management, maintenance strategies, and reliability, delivered in under 10 minutes. Hosts Pete and Drew offer jargon-free tips and real-world examples for maintenance professionals and engineers. New episodes every fortnight.

Episodes

  • Operate for Reliability: Why Operators Stop Telling You About Damage
    Operate for Reliability: Why Operators Stop Telling You About Damage 09.11.2026 7m
    "Get out there and drive 'em like a taxi." Then the same operator drops a wheel into a pothole and gets a very different conversation. Two messages, same crew, same morning, and the operator does the maths. Pete and Drew break down why operators stop reportingdamage, and what a site can do about it: make it safe to speak up, then do something with what they say. Performance puts accident damage against a 24 hour day, per machine, per year. Cost is the fault code reset button, and how one ignored code turns a planned job into next week's breakdown. Risk is thehaul road damage everyone has stopp...
  • Reported But Not Actioned: Why Culture Beats Technology on the Failure Curve
    Reported But Not Actioned: Why Culture Beats Technology on the Failure Curve 26.10.2026 8m
    Hundreds of hydraulic hoses reinstalled after a repair. Some have no clamp, some have no grommet, and the work order says complete.Pete and Drew walk the failure curve left to right, from oil analysis and vibration to the operator who hears it, feels the heat or smells it, and why the further left you catch a problem, the more choices you keep. Sensors and AI only tell you sooner. What happens next is people and process: identify, report, plan and schedule, execute to a standard.Break Tip: Tomorrow, pick one machine on service. Look at every hydraulic hose you can see. Are clamps in place? Are...
  • Still Standing Isn't Integrity: Why Structures Belong in the Plan
    Still Standing Isn't Integrity: Why Structures Belong in the Plan 12.10.2026 7m
    Fixed plant flaking with corrosion, and the site says it's meeting the intent of maintaining integrity. It's still standing, so it's fine.Except standing isn't the required outcome. Pete and Drewbreak down what structural integrity actually means: keeping the asset in a non-degraded state so it can do its job. A structure that's lost material to corrosion but is still holding up isn't integrity maintained, it's integrity being spent.They also cover why structural integrity isn't a separate piece of work run by a different team. It's one of the five categories in the maintenance strategy from t...
  • Three Flags, No Fix: The RCA That Missed a Second Failure
    Three Flags, No Fix: The RCA That Missed a Second Failure 28.09.2026 8m
    A 785C A-frame bearing failed. Two days of unscheduled downtime, a line bore, a proper RCA.The RCA was genuinely good. The site found the bearing hadbeen installed wrong six months earlier, rewrote the install procedure, added QA checkpoints. Textbook root cause work.Pete and Drew walk through what that RCA missed: an existing 1000-hour PM check had already flagged that same bearing out of spec, three times, and none of those flags ever made it into the CMMS. Once the site dug further, the same gap held across the whole mobile work group, not just the one bearing.This is the Failure Response M...
  • The 5,000 Hours You Lose When Nobody's Watching
    The 5,000 Hours You Lose When Nobody's Watching 14.09.2026 7m
    Same site. Same fleet. Same final drives, same duty. Oneera: final drives ran to 20,000 hours before rebuild. A few years later: 15,000.Nobody decided to stop watching the oil. It just stopped being anyone's daily job.Pete and Drew break down FLAC (Fuel, Lubricant, Air, Coolant) as the full chain, not just an occasional oil sample: receiving and storing it clean, dispensing it right, monitoring it in service, and acting on what the results tell you. Three people control it day to day: the Maintainer at the dispensing point, the Storeman responsible for clean bulk supply, and the Engineer setti...
  • Design for Maintainability: Ten Centimeters to the Left
    Design for Maintainability: Ten Centimeters to the Left 31.08.2026 6m
    A grease point on a conveyor drive, tucked behind the guarding. To reach it: isolate the whole conveyor, pull the guard, grease it, put the guard back, re-verify. Half an hour, gone, every single week - for the life of the asset. It could have sat ten centimeters to the left and never needed any of it. That's design for maintainability in one image. Not a poster slogan - a specific check run during the engineering phase, before a design becomes real. Pete and Drew walk through what that review actually looks like (asset classes, access criteria, a walk-through for what's built and a desktop re...
  • Workshop Capacity: Same Bay Count, a Fraction of the Work
    Workshop Capacity: Same Bay Count, a Fraction of the Work 17.08.2026 8m
    Pete ran the same fleet through two completely different ways to work out how many workshop bays a site actually needs for their mobile fleet and landed on the same number both times. The catch: one method took weeks longer than the other, and it wasn't the accuracy that changed.Pete and Drew break down zero-base (build it up task by taskfrom the full maintenance strategy) versus top-down (start from fleet availability and sort the downtime you already have). Zero-base gets you there, but its assumptions are buried across a hundred task lines, easy to quietly inflate the numbers to match what...
  • Equipment Readiness: The 80% You Can Build at a Desk, and the 20% You Can't
    Equipment Readiness: The 80% You Can Build at a Desk, and the 20% You Can't 03.08.2026 9m
    The first 797F haul truck fleet built on site relocated its filter mounting points for a good reason: ground level, not wedged on a ladder in the chassis. Nobody wrote it into the documentation. When the crew walked all forty service procedures against the real machine, eleven needed something changed.In this episode, Pete and Drew close the four-part Operational Readiness series with the Equipment lens - the eighty percent of a maintenance strategy you can build at a desk, and the twenty percent you can't build anywhere but standing next to the machine. Running it through the JEBS PCR Triad,...
  • Systems Readiness: A Populated-But-Wrong System Tells You a Lie With Confidence
    Systems Readiness: A Populated-But-Wrong System Tells You a Lie With Confidence 20.07.2026 7m
    Monday morning. The electric-drive haul fleet's landed, the crew's through handover, and it's time for the first scheduled service. The planner opens the CMMS - and there's nothing in the system to plan against. The functional location doesn't even exist yet.In this episode, Pete and Drew go deep on the Systems lens of Operational Readiness. Running it through the JEBS PCR Triad, they break down why a populated-but-wrong bill of materials is worse than an empty one; why materials readiness has to be a procurement-phase conversation, not a first-service surprise, when a single component's lead...
  • People Readiness: Same Job Title, Different Machine
    People Readiness: Same Job Title, Different Machine 06.07.2026 11m
    A large open cut operation replaces its aging diesel haul truck fleet with electric-drive machines — and twelve months later, the experienced crew that knew those old trucks inside out is staring at a completely different animal. Training isn't the fix. The decision that shapes everything else should have been made before the purchase order was even raised.In this episode, Pete and Drew go deep on the People lens of Operational Readiness. Running it through the JEBS PCR Triad, they break down the operating-philosophy choice that drives your whole maintenance strategy - internal, MARC, or hybri...
  • Operational Readiness: Why the Work Before the Work Determines Everything
    Operational Readiness: Why the Work Before the Work Determines Everything 22.06.2026 10m
    Most sites focus on maintaining assets once they're running. Operational Readiness is everything that has to happen before the first shift starts — and when it's skipped, the performance gap costs more than most businesses realise. In this episode, Pete and Drew break down the three lenses of Operational Readiness — People, Systems, and Equipment — and make the case for why the 80% of strategy work you can do before a machine arrives is only half the story.Break Tip: If you have a new asset coming to your site, ask three questions. Do we have plan to have people ready to operate and maintain t...
  • Asset Management Plans: The Ultimate Operational Handshake
    Asset Management Plans: The Ultimate Operational Handshake 08.06.2026 8m
    In this episode, Pete and Drew demystify the Asset Management Plan (AMP), to reveal why it is the ultimate alignment tool between operations and maintenance. They break down how combining your Operating Context, Maintenance Strategy, and Scheduled Downtime Strategy creates a powerful roadmap to balance Performance, Cost, and Risk. Learn why treating your AMP as a living, breathing document is the only way to help ensure your asset is running at optimal efficiency.Break Tip: Pick one critical asset on site that has been giving you grief and review the key elements of an AMP. Is the Operating Co...
  • When the Plan Unravels: Swinging Loads & Missing Procedures
    When the Plan Unravels: Swinging Loads & Missing Procedures 25.05.2026 8m
    The JHA was done. The OEM procedure was on the table. The crew were trying to do the right thing. And a worker still ended up on the ground with a serious leg laceration. In this episode, Pete and Drew break down Safety Alert SA24-04 from NSW Resources Regulator — a haul truck rear strut replacement that went wrong the moment the plan changed and there was no documented fallback to catch the team.Running the incident through the JEBS PCR Triad, Pete and Drew unpack how a fit-for-purpose lifting jig sitting unused on site exposed a critical gap in procedure and training, how the cost of a proce...
  • Still Running… But is it reliable?
    Still Running… But is it reliable? 11.05.2026 9m
    Is your plant running because it's reliable — or because your team is holding it together with workarounds and tribal knowledge? In this episode, Pete and Drew tackle one of the most common misconceptions in maintenance: that reliability just means fewer breakdowns. They break down what reliability actually is, why availability and maintenance aren't the same thing, and how to tell the difference between a healthy asset and one that's surviving on heroics. Break Tip: Walk the plant and identify the top three assets your team always complains about. Against each one ask yourself this one questi...
  • No Visibility, No Control: Fixing the Off-Site Repair Process
    No Visibility, No Control: Fixing the Off-Site Repair Process 27.04.2026 7m
    You send a gearbox out the gate and it vanishes. No status update, no confirmed lead time, and an invoice that lands like a lead balloon much larger than you expect. Sound familiar? In this episode, Pete and Drew shine a light on the "Off-Site Black Hole" — the fragmented repair process quietly leaking millions from maintenance budgets across the industry.Running the problem through the JEBS PCR Triad, Pete and Drew break down how unknown rebuild lead times wreck your component replacement schedule, how poor scope management and ignored warranty claims mean many operations are paying twice for...
  • When Jumpstarts Become Normal: Chronic Failures & the Cost of Looking Away
    When Jumpstarts Become Normal: Chronic Failures & the Cost of Looking Away 13.04.2026 6m
    Nobody questions the jump-start ute — until someone does. In this episode, Pete and Drew break down a chronic breakdown event where a dedicated vehicle and fitter were burning up to eight hours a shift just getting trucks to start, and the whole site had simply accepted it as normal.It took one reliability professional sacrificing a night's sleep, sitting in the ute on the go-line, to find the culprit: operators leaving their work lights on during crib breaks.Running the event through the JEBS PCR Triad, Pete and Drew unpack how chronic short stoppages quietly destroy your circuit efficiency,...
  • Single Point of Failure: Guardrails, Modifications & the EX5600 Incident
    Single Point of Failure: Guardrails, Modifications & the EX5600 Incident 30.03.2026 7m
    Four metres. That's not a stumble — that's a life-changer. In this episode, Pete and Drew break down Safety Alert SA26-02 out of the Hunter Valley, where a worker fell from a Hitachi EX5600 excavator after a guardrail stanchion — weakened by an aftermarket modification and an undetected crack — simply snapped.Running the incident through the JEBS PCR Triad, Pete and Drew unpack how chasing Performance through platform modifications introduced hidden failure, how ignoring the small Cost of a repair weld led to millions in lost production while the investigation was carried out, and how normalis...
  • The 15-Year Crane Problem: When Chemistry Beat Mechanics
    The 15-Year Crane Problem: When Chemistry Beat Mechanics 16.03.2026 8m
    For fifteen years, a primary production rail crane was the site’s biggest headache. Availability sat at just 65%, improvement projects kept failing, and the team had started accepting the problem as “just the way it is.”In this episode, Pete and Drew unpack a fascinating case study submitted by Adam reviewing through the JEBS PCR (Performance, Cost, Risk) Triad. They reveal how environmental contamination was silently destroying compressor oil—a chemical root cause for a mechanical nightmare.The Result:Performance: Availability jumped from 65% to over 85% sustained.Cost: $150k investment per c...
  • The Stored Energy Debt: When the Line of Fire Hits Home
    The Stored Energy Debt: When the Line of Fire Hits Home 02.03.2026 8m
    When heavy metal meets gravity, the results are life-changing. In this episode, we dissect the Resources Queensland safety notice regarding a 5-piece wheel assembly incident that injured a tyre fitter. Pete and Drew walk through the technical "Hold Points" identified in the safety notice that every tyre bay needs, touching on the different safe mounting options to the "Captain of the Zone" communication rule. If you're working with tyre assemblies, this is your guide to potentially closing the gap in your processes before gravity does it for you. Break Tip: Tomorrow morning, go to your tyre ba...
  • Beyond Spare Parts: Why "Tick and Flick" is More Expensive Than Spare Parts
    Beyond Spare Parts: Why "Tick and Flick" is More Expensive Than Spare Parts 16.02.2026 6m
    Is your maintenance team stuck in a "replace and restock" cycle that never actually stops the breakdowns?In this episode of Maintenance Break, Pete and Drew tear down a real-world case study: a Hitachi EH3500 haul truck with an HV cabinet door that failed mid-shift. While the site blamed a lack of spares, the root cause was a "tick and flick" culture that ignored a visible defect for weeks.Using the JEBS PCR Triad, they examine how a failure in the "Check" phase of the PDCA cycle creates a ripple effect:PERFORMANCE: Why 4.5 hours of immediate downtime was entirely preventable.COST: The "financ...

Popular in

The podcast also appears in the podcast charts of these countries.