Corrosion Chronicles
Materials Technology Institute
0
An original podcast series from the Materials Technology Institute, focused on materials in the processing industry and the experts within the community.
Episodes
-
Equipment with Loose Polymer Liners 04.11.2026 1h 4mIn this episode, co-hosts Heather Allain and Marc Cook welcome Hisham Abu Samra of Corrosion Resistant Technologies for a discussion on equipment with loose polymer liners and the important design, fabrication, and maintenance considerations that come with their use. Hisham explains how loose liners work and explores key factors affecting their performance, including differential thermal expansion, temperature limitations, flange design, flare radii, and shell fabrication. The conversation also covers specifications and standards, vacuum design, permeation, and the challenges of replacing line... -
Inside the Cooling Water Triangle 07.10.2026 57mIn this episode, co-hosts Heather Allain and Marc Cook welcome Gordon Johnson, site development manager at Solenis, for a wide-ranging discussion on water systems and the challenges of maintaining efficient, reliable heat exchanger performance. Gordon breaks down the “cooling water triangle” of bioaccumulation, deposits and corrosion, and explains how each can affect equipment performance and water treatment strategies. The conversation explores heat exchanger design, biofilm removal, online cleaning methods and alternative approaches to water treatment, as well as the environmental considerat... -
FRP Flange Design 02.09.2026 55mIn this episode, co-hosts Heather Allain and Marc Cook welcome Bruce Hebb, senior engineer at RPS Composites Inc., for a deep dive into fiber-reinforced plastic (FRP) flange design and the factors that influence performance and reliability. Bruce explains the differences between full-face, raised-face and lap joint, or Vanstone, flange configurations, including how gasket selection, bolt torque and load distribution can affect sealing and stress on FRP components. The conversation explores current ASME design standards, the importance of proper construction methods and the challenges engineers... -
Understanding FMECA, RCA, and Value Engineering 05.08.2026 1h 9mIn this episode, co-hosts Heather Allain and Marc Cook welcome Maria Jose Oestergaard to explore three essential reliability and continuous improvement tools: Failure Modes, Effects, and Criticality Analysis (FMECA), Root Cause Analysis (RCA), and Value Engineering (VE). Maria Jose explains when to use each methodology, how to define the scope of an analysis, and the importance of assembling the right team and documenting findings throughout the process. She also discusses common triggers for implementing these tools, how organizations can leverage the results to improve performance, and when... -
The Science of Bonded Liners 01.07.2026 53mIn this episode, Michael Krauss, sales director at Knight Material Technologies, joins co-hosts Heather Allain and Marc Cook to discuss bonded lining systems and the materials considerations that influence long-term performance. Michael explains the different types of fabric backings, adhesives, and their ideal applications, while outlining best practices for installing bonded sheets and verifying bond integrity through pull-off testing and nondestructive evaluation methods. The conversation also highlights MTI research on cap strips and current work examining temperature ramp rates for bonded... -
SEM & EDS in Failure Analysis: Let the Sample Tell the Story 03.06.2026 1h 2mIn this episode, failure analysis expert Tedd Anastas of Anastas Technical Services and Brent Moore of Moore Analytical join co-host Heather Allain and guest host Andrew Rentsch, Materials Engineer at Huntsman Corporation, for a practical discussion on scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and their role in failure analysis and materials investigations. The conversation explores how SEM differs from optical microscopy, how SEM paired with EDS can reveal important chemical and microstructural clues, and why EDS results are often best treated as qualitative in... -
Providing Materials Expertise to Process Commercialization 06.05.2026 1h 5mIn this episode, Richard Clapp, retired principal consultant from DuPont, joins co-hosts Heather Allain and Marc Cook for a discussion on the role of materials expertise in process commercialization. Drawing on decades of industry experience, Richard outlines the three primary types of process commercialization and the institutional challenges companies often face when scaling new processes from the bench to production. The conversation explores how impurities, feedstock variability, and solids handling can introduce unexpected complications, as well as why engineers tend to take conservative... -
Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 2 01.04.2026 42mIn this episode, the second installment of a two-part series, Bert Jennings, owner of Jennings Materials Consulting in Spring, Texas, rejoins co-hosts Heather Allain and Marc Cook to continue their discussion on hydrofluoric acid (HF) and anhydrous hydrogen fluoride (AHF) service. Building on Part 1, the conversation shifts to detection, materials, and real-world application. Bert outlines key NDE techniques for identifying cracking and hydrogen blistering, then dives into weld practices and the importance of proper stress relief in carbon steel systems. The group also explores alternative mat... -
Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 1 04.03.2026 42mIn this episode, the first installment of a two-part series, Bert Jennings, owner of Jennings Materials Consulting in Spring, Texas, joins co-hosts Heather Allain and Marc Cook for a technical discussion on hydrofluoric acid (HF) and anhydrous hydrogen fluoride (AHF) service. Bert begins by outlining where HF is commonly used and addressing common industry tropes and misconceptions about how the fluid behaves in process environments. He explains what “anhydrous” truly means in practical terms, including how dry anhydrous hydrogen fluoride must be and why strict moisture control is essential. T... -
Corrosion and Wear Materials Solutions 04.02.2026 54mIn this episode, Robert Freed, Ph.D., FASM, Associate Director at the Materials Technology Institute, joins co-hosts Heather Allain and Marc Cook for a practical, materials-focused discussion on corrosion and wear. Robert helps clarify the differences between abrasion, adhesive wear, erosion, and cavitation, and explains how these damage mechanisms commonly show up in industrial equipment such as extruders and other high-wear components. The conversation explores key variables that influence wear performance, how wear can accelerate corrosion, and why factors like particle size matter. Robert... -
Eddy Current Testing (ECT) of Heat Exchanger Tubes 07.01.2026 54mIn this episode, Evan Lowrance, Corporate NDT Engineer at Webco Industries, and Jonathan Konerza, Tubing Division Manager at Sentinel Integrity Solutions, join co-hosts Heather Allain and Marc Cook for an in-depth look at eddy current testing (ECT) of heat exchanger tubes. Together, they break down how ECT works, the differences between internal and external testing, and how factors like magnetism and material conductivity influence test results. The conversation explores how eddy current testing compares to IRIS testing, what types of defects ECT is best suited to detect, and where its limita... -
Column Internals 03.12.2025 1h 1mIn this episode, Danny Mock, managing partner for M10 Process Equipment, Inc., joins co-hosts Heather Allain and Marc Cook to take listeners inside the world of column internals and the fundamentals that drive mass-transfer performance. Danny breaks down what mass-transfer equipment is and how internals efficiency is evaluated, offering practical insight into design considerations that influence reliability and long-term operation. He discusses the importance of selecting materials with appropriate corrosion allowances, how internals are attached and supported, and what engineers should know a... -
Explosion Cladding 05.11.2025 52mIn this episode, Mukesh Ahlavadi, Global Director of the Chemicals Market at NobelClad, joins co-hosts Heather Allain and Marc Cook to explore the world of metal cladding and its critical role in modern engineering applications. Together, they provide an overview of hot roll bonding versus explosion cladding, examining the key drivers behind each process and why industries turn to cladding for enhanced material performance and corrosion resistance. Mukesh walks through essential fabrication considerations, including the use of batten strips, interlayers, and post-cladding operations, while sha... -
Gasketed Joints 01.10.2025 1hIn this episode, Kevin Ganschow, materials & corrosion consultant at Mechanical Materials Engineering, LLC, joins co-hosts Heather Allain and Marc Cook to unpack the intricacies of gasketed joints. The discussion begins with a foundational look at flange assemblies as systems before diving into key factors such as gasket stress, bolt reuse, and lubrication. Kevin highlights best practices for bolted joint assembly and integrity programs, emphasizing the importance of assembler training, flange tagging, and condition assessment. The episode also explores advanced considerations including joint... -
How a Materials Lab Works 03.09.2025 54mIn this episode, Jennifer Larimore and Avery Boyer, Materials Engineers at Chemours, join co-hosts Heather Allain and Marc Cook to share an inside look at how a materials lab works. Jennifer and Avery walk through the step-by-step process of analyzing samples—from sectioning, cleaning, reviewing documentation and photographing through the final wrap up of documenting and communicating findings to the customer. They discuss analysis methods like nondestructive evaluation, XRF identification, hardness, fracture testing, polishing and metallography to uncover critical material properties. The dis... -
Materials Selection During Project Execution 06.08.2025 37mIn this episode, Cathleen Shargay, Advisor of Materials and Welding Engineering at Becht, joins co-hosts Heather Allain and Marc Cook to explore the complexities of materials selection during project execution. The conversation covers a wide range of essential topics, from understanding what materials selection diagrams (MSDs) are and how they interface with process engineering, to evaluating life cycle cost inputs and establishing design life. Cathleen also unpacks how MSDs relate to Integrity Operating Windows (IOWs) and Corrosion Control Documents (CCDs), and how these tools work together t... -
High Temperature Hydrogen Attack 02.07.2025 39mIn this episode, Nate Sutton, materials engineer at Equity Engineering, joins co-hosts Heather Allain and Marc Cook for a deep dive into high-temperature hydrogen attack (HTHA) and the evolving guidance used to evaluate and mitigate its risks. Nate shares his firsthand insights on the origins and evolution of Nelson curves, the role of post-weld heat treatment, and the recent development of time-dependent curves still under review by API. The discussion also explores the role of advanced non-destructive examination (NDE) techniques, MTI’s contributions to HTHA detection and assessment, and how... -
NDE of In-service Equipment 04.06.2025 55mIn this episode, Ana Benz, Chief Engineer at IRISNDT, joins co-hosts Heather Allain and Marc Cook for a deep dive into selecting non-destructive examination (NDE) techniques based on expected damage mechanisms. Ana shares insights on recent advancements in radiography, field-based hardness testing, and imaging of hardness indents to assess effectiveness. The conversation also explores proper surface cleaning for inspections, the use of chemical composition analysis to detect degradation from galvanic corrosion, and the role of Integrity Operating Windows (IOWs). Additional topics include remot... -
Abrasion and Erosion 07.05.2025 56mIn this episode, Murray Pearson, Director, HPM Technology Development, Metals at Hatch, joins hosts Heather Allain and Marc Cook to delve into the intricacies of abrasion, erosion, and erosion corrosion. They explore the impact of these phenomena on various equipment types, the materials responsible for these damages, and effective strategies for equipment protection. Topics include impingement effects, methods for evaluating material suitability such as plant coupon testing, ongoing MTI research initiatives, factors influencing abrasion rates, and advanced NDE techniques for equipment assessm... -
Fabrication Considerations for Duplex Stainless Steels 02.04.2025 46mIn this episode, Ben Sprengard, managing director of innovation at Enerfab, sits down with co-hosts Heather Allain and Marc Cook to discuss fabrication considerations for duplex stainless steels. They explore key topics, including property comparisons to austenitic stainless steels, forming, machining, welding, phase transformation during cooling, welding QC, solution annealing, QC for duplex fabrication, in-service inspection, and heat exchanger specifics. Corrosion Chronicles is produced by Association Briefings.
Popular in
The podcast also appears in the podcast charts of these countries.